Vattenfritt kylmedel avsett för:

För alla moderna prestandafordon samt racemotorer.


Över 180°C.


Skyddar ner till -40°C.


Förbättrar förbränning, Maximerar effekt, förebygger kok ,överhettning.

korrosiva egenskaper:

Eliminerar både korrosion och erosion.


Helt ålderbeständig, minst 25 år


Klassad som icke giftig

Power Cool 180° är ettt vattefritt motorkylmedel speciellt designad för motorsport. De unika egenskaperna hos Evans hyllas av professionella racing team världen över.

No Water Means...

No Overheating

Power Cool 180 has a boiling point of 180°C and will not boilover.

More BHP

Power Cool 180 eliminates premature detonation associated with overheating.

No Corrosion

Water contains oxygen, oxygen allows corrosion. Power Cool 180 eliminates corrosion.

No Pressure

Power Cool 180 allows your cooling system to run at a lower pressure, reducing the strain on engine components.

No Liner Pitting

Power Cool 180 generates significantly less pitting when compared with all water based coolants.


The Science Behind Evans

No Overheating

Traditional water based coolants regularly cross the thermal boundary that separates Efficient Nucleate Boiling (A) from Inefficient Critical Heat Flux. CHF leads to localised film boiling (B) and steam bubbles circulating throughout the cooling system, which often results in overheating and combustion issues. Evans Waterless Coolants boil above 180º C ensuring effective cooling and efficient fuel burn is maintained for all engine loads and ambient air temperatures.

More BHP

When water-based coolants vapourise adjacent to the combustion zone, hot-spots are formed. These hot-spots have been proven to cause pre-ignition in petrol engines and detonation issues in diesel engines. Evans Waterless Coolants eliminates hot-spots and subsequently improve combustion efficiency and increase power delivery.

No Corrosion

Water is the root cause of corrosion in all cooling systems, via oxidation (rusting) and galvanic (electrolytic) action. Evans coolants do not contain dissolved oxygen and have a much lower conductivity (increased resistivity) compared with water-based coolants. Subsequently replacing water with Evans non-aqueous solution eliminates corrosion and the need to periodically refresh or replenish the coolant.

No Pressure

Water requires additional (cap) pressure to prevent it boiling within the engine. This additional pressure can vary between 7psi and 29psi (0.5 Bar to 2 Bar) which places significant stress on cooling system components, including hoses, gaskets and radiators. Evans Waterless Coolants generate much lower pressures, in the region of 4psi, and therefore reduces strain on all components.

No Liner Pitting

Liner pitting is primarily caused by the rapid formation and collapse of small steam bubbles on the metal surface. Over several years this process can lead to severe surface erosion and deep liner pitting. Evans Waterless Coolants are not prone to forming vapour bubbles and proven, by SAE trials, to virtually eliminate surface erosion and pitting.



Heavy Duty Products Aerospace Products
Preparatory Products